Changelog Version 1.10.0.0

Added

• Profinet View & DCP (requires Npcap or Winpcap):

  • Scans and displays all DCP-enabled devices on the network
  • Identifies specific information about connected Profinet devices
  • Performs specific device actions:
    • Customizes IP Address, Profinet Device Name, Subnet Mask, Gateway
    • Different Reset Modes
    • Wink for visual identification

• Diagnose View:

  • Scans the Turck devices on the network and flags devices with existing diagnostics
  • Displays the device status or diagnostic message
  • Direct link to the creation of the diagnostic report
  • Accessing the detailed diagnostics page of the affected device

• Monitoring and visualization of EZ-Array light curtain with light beams that can be switched on and off.

• Optional: start of a DHCP server with the following functions

  • DHCP Scan List
  • DHCP Start/Stop
  • DHCP Get Adapter List

• Visualizes the time sequence of process input data of connected analog devices/sensors

• CODESYS recipes and/or log files (USB data) are uploaded to the PC

Changed

• Automatic checking and display of new TAS versions
• The execution of TAS to set the firewall rules without administrator rights can be stopped without the TAS being executed
• Bar graphs for the display of the RFID tags in the read/write area and the detuning of the RF read/write head in the HF RFID tag actions
• IP 0.0.0.0 is treated as a default IP address in the network view
• For compatible IO-Link devices, the product variant ID or description ID is also displayed in the IO-Link Web Part when changing the DeviceID
• View IP address and Profinet device name when a device is opened via TAS
• An ARGEE project in the device can be overwritten via the ARGEE view without prior deletion if no protection is set
• Backup name of the CODESYS application is made up of the name of the CODESYS application, IP address and date
• Support for Q180/Q300-LNX UHF readers
• Customization of different icons and texts
• Adjustments to the website layout

Fixed

• Malfunction due to CODESYS user login on certain firmware versions
• Compatibility problems with existing backups of the CODESYS application
• If more IODDs are linked than the memory size of the web browser allows, the oldest IODD is replaced
• Fixed Modbus TCP and EtherNet/IP™ memory mapping in web client
• Added missing channel numbers in Modbus TCP and EtherNet/IP™ memory mapping
• Display of BEEP support of the FEN20-4DIP-4DOP
• Incorrect sorting of IP addresses in IO-Link and CODESYS views
• Excom Gen: Failsafe mode is not displayed on all modules
• Updated some text messages and tooltips

Changelog Version 1.9.1.0

Changed

• Output of further messages in the CODESYS view
• Display of signal quality and antenna detuning only with compatible read/write heads
• FFT scaling in the Radar Monitor

Fixed

• Missing ASCII characters in the HF tag actions
• Adjustment of the scrollbar
• Some text messages and tooltips updated
• Multiple display of the vibration monitor

Changelog Version 1.9.0.0

Added

• CODESYS View:
• Scans and displays all CODESYS devices on the network
  • Retrieves specific information about connected CODESYS devices
  • Performs specific device actions:
    • Saves application to CODESYS device (Restore 1)
    • Downloads application from CODESYS device (Backup 1)
    • Warm start of the application
    • Cold start the application
    • Stops the application
  • Supports CODESYS user and password handling
  • Save application to the device as a batch function
• Change language to Chinese, French or Spanish
• Cable Monitor for the M12Plus connector
• Vision Monitor for intelligent cameras
• Extension of the RFID tag actions HF to include visualization of signal quality and antenna detuning
• Extension of the RFID tag actions HF by the number of readings
• Manually added devices in the network view are also displayed in the BEEP, ARGEE and CODESYS view and actions can be performed
• Polling option to prevent resetting of the IO-Link process output data after 20sec

Changed

• Adaptation of the top-level navigation
• The user is informed if the started TAS version is still blocked by an older instance
• The link to the downloads on the product website is country-specific
• Further differentiation in the address mode between rotary switches and dip switches
• Adaptation of the design of the web pages

Fixed

• Updated some text messages and tooltips
• Repeated capturing of the same HF tag is not indicated
• Incorrect block transfer with inconsistent parameter sets
• Incorrect redirection to the device web page after IP address changes or a reset

Changelog version 1.8.1.0

Fixed

• Supports Reader ID for TN-UHF-Q180L300-AUS-CDS and TN-UHF-Q300-AUS-CDS

Changelog version 1.8.0.0

Added

• Switching language to German
• New Radar Monitor 2.0 with angle measurement
• Magnet Monitor to represent the magnetic field strength in all three axes as well as the magnitude vector and sum vector
• Exports configuration from connected IO-Link devices
• Imports configuration into one or several connected IO-Link devices in a batch
• Sets Real Time Clock to one or several devices in a batch
• Supports use of network card with several IP addresses
• Supports firmware updates for devices with old firmware version within 180 seconds, after a power reset has been performed
• Supports open device webserver for devices with old firmware
• Shows Turck cloud settings in TAS
• Exports or prints list of scanned UIDs of HF Tags

Changed

• Global password can be set or deleted via action in the toolbar
• Run firmware updates via the single device actions
• Device name added in IO-Link view
• Information on waiting time issued after download of a ARGEE program
• Some icons replaced and reordered
• Entry of a valid subnet mask checked
• Shows EtherNet/IP and Modbus TCP mapping in GEN device documentation, if the station is configured without connected hardware

Fixed

• Reloading of "IODD Configurator - Observation Tab" after changing parameters
• Some text messages and tooltips updated
• Supports firmware updates for all hardware versions of TBEN-L…-8IOL
• Incorrect assignment of ID and device type for Q300
• IODD Configurator: Parameters that control the scope of process data are also supported under "Observation".
• Under the GEN device documentation a diagnostic word is to be considered in the EtherNet/IP mapping if the slot is configured as 'empty slot' and is located within the module list

Changelog version 1.7.0.0

Added

• IO-Link View:
  • Scans and views Turck IO-Link masters and all connected IO-Link devices in the network
  • Gets specific information about connected IO-Link devices
  • Executes specific device actions, like Wink, open IO-Link Master in TAS, open IODD Configurator and IO-Link device monitor
  • Filters for specific IO-Link devices
• RFID Tag Actions HF:
  • Scans UIDs of HF tags and creates a list
  • Gets tag information about tag type, memory size and supported features
  • Reads tag memory in Hex and ASCII
  • Edits data and writes to tag in Hex
  • Sets specific data to the complete or a selected memory area of the tag
• Diagnostic report to export or print all device settings, status and diagnostics
• Configuration mode for inductive coupler with IO-link
• Additional plot for suppression FFT in the Radar Monitor
• Checks and informs if an addressing conflict occured for the used network adapters
• Supports factory reset, sets IP address and accesses system settings of TX devices
• Supports new hardware version of BL20-E-GW-EN and BL67-GW-EN
• Supports to “go online” with a device automatically, if it isn´t connected to a plc
• Supports to activate Force Mode to get access to the device, if it is connected to a plc

Changed

• Improved update process of TAS, which replace the files, stops the old TAS instance and restarts new version of TAS automatically
• Changes default settings in RFID application “Tag Trace”
• Devices with running ARGEE or CODESYS programs supports edit device, reset and firmware update
• Uncheck the import of unique device data by default

Fixed

• Prevents that process data won´t be updated by using the USB IO-Link Master
• Size of the navigation bar changed
• Some text messages and tooltips updated

Initial version 1.6.0.0